Friday, November 20, 2026

3D Printed Fidget Spinner: Engineering Solved

 

Challenge: For a nine year old student to reverse engineer a fidget spinner to produce an original working model.

Background: It started as a challenge generated from an AI Generated ChatGPT prompt, from here the students located an online 3D Printed example from Bambu Labs which they used for the base mechanism.

During the past week several students have made an attempt to create their own version using the mechanism.  This has proven slightly more challenging than first anticipated as the students had to measure the insert absolutely accurately to allow it to be put into place but also allow it to stay there and then be able to spun once it is there.   The gap was 20mm however the first attempts by the students for this then were not successful as they did not account for making it a 'snug' fit.

The two examples shown left both feature this issue although neither was a particularly challenging design or a long print.   We also encouraged the students to personalise their design in some way so that the result was not a set of basic rings.

The design that ended up being the first successful design shown above on its design page featured the name of the student on one of the arms of the design.

We now have the ability to have this student take on a leadership role with this project as they have unlocked the engineering of the design.   Thy could share their design via Tinkercad or check or look at in-depth the designs other students are making.

Level of Difficulty:   Medium - this design is already supported by the previous identified and located mechanism to spin, this design is the rest of the project, which needs to be precise but also has added elements to consider - how long are the arms, how much should the gap be, is the design at 120 degree distance etc.   When AI prompts are used their are a range of design challenges suggested, some of which include complicated blades.

Resources to complete the project: iPad, Tinkercad App,  Bambu H2D, Bambu 'blue' regular PLA.

Size: The design is a 100mm wide.   The arms extend 40mm from the base of the design which has a width of 5mm.  The design has a width of 4mm.

Cost/Price: The project uses 6g of PLA to complete - this has a price point of $0.09c (NZD).  This made this challenge ideal for the classroom as we were able to complete a full range of classroom designs including those that the did not work without too much concern about unnecessary printing.

Timeframe: To complete this print the printer was running for twenty one minutes as the machine has a six minute warm up procedure this gave it an actual print time of fifteen minutes - again ideal if you were looking to print a class set of designs.   It also would allow multiple prints to be loaded onto the plate.

What we would do differently/Next steps for the students: The mechanisms at the heart of the design is probably a step too far for our nine year olds however combing it with the other aspects of the design has brought up several engineering challenges based around the size and length of the arms, the relative ability to spin the design, the consideration to increase the number and size of the arms etc.   There are more coming from this basic design. 


No comments:

Post a Comment