Showing posts with label lego/not lego. Show all posts
Showing posts with label lego/not lego. Show all posts

Friday, July 17, 2026

Non-Lego: Lego Figure

Challenge: To create an authentic and unique "Lego' inspired figure.

Background: We've discussed the enjoyment that a lot of students get from designing and using official Lego products.  This is of course not that - it is a lego inspired figure that was created (relatively) oversized that is more of a homage to the original than making an actual figure.  As the student concerned who was eight years old was designing it they were able to be creative and add features that would not be necessarily be associated with an actual 'real' figures.

The student was able to create the figure themselves using the main interface.   The additional features that can be seen on the print including the hands, the hat, the facial features and the symbol were all added from the main design interface.

As always you are able to search the entire blog for creations and designs from students using this theme - the search bar top right will direct you to a number of prints that have the label 'lego' and 'non-lego' including such designs as using AR/VR tools to enhance the students designs.

Resources used to complete this print: Tinkercad App, iPad, Bambu P1S, Orange regular PLA.

Level of Difficulty: Medium - there is some adaption to be made to the print but the main design features are in place.  The student was able to develop this design themselves (as an eight year old) without any assistance from the teacher.

Size: The print presently measures 40mm across and was 80mm high.  It was 10mm wide.   As noted above this is oversized for a traditional Lego figure but the student has intended this more as 'lego inspired' rather than a 'lego' figure.

Cost/Price: The unit used 15g of PLA to complete the print and there was 5g of PLA that was needed to act as 'rafting' or support.   This was mainly created by the need to support the overhang of the hat.  It had a price point of $0.40c to produce the print.

Timeframe: The total print time for this was one hour.  This included a six minute warm up time which is included in this time.   If this was to be produced to a scale of actual lego this would be reduced.

What we would do differently/Next steps for the student: The hat is a little oversized and could be reduced in size.   The hands of the figure are currently probably too big and also face backwards.  Finally the student could have looked at refining the figure with the design on the front of the chest.

Thursday, June 25, 2026

3D Printed 'Not Lego' Lego Minature Chairs

 

Challenge: To produce an authentic looking piece of furniture to work in conjunction with a 'lego/not-lego' set or scene.

This activity has several reference points.  Firstly one of the major challenges that our students were involved in was the making a 3D Printed furniture suitable for a Dolls House.   You can see an overview of this major project by clicking on the link here.   An off shoot of this project was creating 'lego' scale figures.

A discount purchase of end of line promotion from a local supermarket meant that we could access several kitchen scenes and our students as result worked on a series of figures to match and then items of furniture to fit into the scene.  Students AR/VR the creations into these scenes and then we printed in some cases the physical figures.

This design came out of that process as it was an end process of producing a chair to fit around the table.   It was a relatively easy design for the student and allowed them to create something that could easily be printed (see time below) and then modified to fit into the scene.

Resources Used to complete this project: iPad, Tinkercad App (for design and AR/VR projection), Bambu P1S, Cotton Candy PLA.

Level of Difficulty: Low - this was completed independently by a nine year old,  The chair design as it stands (pardon the pun) at the moment is recognisable and functional although the potential would be for further details to increase the challenge.

Size: This is a miniature print to fit into a 'lego' sized scene.   The chairs dimensions at present measure 20mm across is 40mm high and 20mm deep/wide.

Cost/Price:  We have used the Bambu Studios cost price analysis extensively to ensure that we are considering the viability of prints but also to make sure we could identify what could be a 'whole class' activity for someone who is working on a budget or has limited access to a printer.   This design uses 5g of PLA plastic with a price point of $0.13c to produce - making it one of the lowest price prints that we have completed this year.

Timeframe: To complete this print the printer had the standard six minute warm up and preparation time and then printed for twenty one minutes.   This meant of course the total time was under half an hour on the regular default settings.

What we would do differently/Next steps for the students: The design that the student has created as shown left in place is almost too large as it stands at present.   When compared to the rest of the scene it is the size of a high chair but obviously does not have the correct dimension for this.  It needs to be adjusted smaller if it was to be for the table - however once this is completed (and this should take no more than a simple drag and click of the design) the student could make a full set from a single item.   The detail that the P1S can produce given the default settings is extremely impressive.  I have had a casual conversation with someone who is involved in role playing games and their machine is producing all of the figures.

There is huge scope for further design in this range.