Challenge: For the student (nine years old) to design, create and 3D Print their own festive Christmas Tree.
Background: A range of festive themed designs have been published and highlighted on this blog. They have all been keyword tagged with 'Christmas 2026' if you would like to look at examples of the virtual trees and the current 3D Prints. As mentioned we have taken selected virtual prints and turned them into physical prints in a number cases.
In this example shown here we felt that the snowflake on the top of the tree was an interesting twist and the presents that were at the front of the tree would make an interesting pair of challenges for the Bambu H2D Printer to see how accurate that it would be.
Level of Difficulty: Medium - this print has already undergone several revisions from the student involved as they have continued to work on producing details and altering the design (such as the presents which were not there in the original design). There are further adaptions coming and the tree is also going to be converted into a Christmas Card using AI/Pic Collage.
Size: The current dimensions of the tree are 80mm wide and 80mm deep. The tree is currently 120mm tall to the tip of the snowflake.
Cost/Price: The print uses 43g of PLA to complete the project. This gave the tree a price point of $0.70c (NZD).
Timeframe: The print took one hour and forty eight minutes to complete the print. There was a considerable level of rafting and support that was introduced into the layering of the tree, which the teacher needed to take care to remove.
What we would do differently/Next Steps for the students: This student has essentially completed the project. The baubles on the lowest level of the tree which can be seen in the digital version of the design however they did not transfer to the physical print as when the rafting was removed the lower level of the baubles also left.
The decorations that is potential with this design is clear with spray painting and the use of other PLA depending on the potential to redesign the print.



No comments:
Post a Comment