3D Printed Ant: Standard Version

 

Challenge: To create an original and correct insect student (nine year old) designed 3D Print.

Background: As per the last few number of prints on this blog this is in preparation for our 2026 Pet Day.

As per the post from yesterday we experimented with using the P1P Bambu Printer and the Bambu H2D.   With the experience yesterday we printed on the Bambu H2D first and then followed up with P1S when the Bambu H2D didn't print the leg at the back.

As we suspected the print needs to be slowed down, by printing on the P1S we printed an identical design, an identical file but this was successful.   If we were using the Bambu H2D we would slow the process down.

Resources used to complete this print: iPad, Tinkercad App, Bambu P1P, Bambu Blue PLA.

Size: The print measures 55mm wide across at the front from the tip of each leg.   The print has a length of 70mm and the print is 55mm high.  The student (who is nine years old) deliberately introduced the legs and antenna to ensure that they survived the printing process and were not too weak, although it did leave them looking decidedly oversized and blocky.

Cost: To produce this print the project used 38g of regular PLA.   This gave the project a price point of $0.38c.

Timeframe: To complete this print the printer was running for one hour and ten minutes.   This is typical for designs in this run of creations with these dimensions.

What we would do differently/Next steps for the students: The ant when compared to others in the series does not have the facial definition that the others have.   The legs were increased in dimensions and size to ensure that they survived printed but now look somewhat comical and also are identical.   Finally the colour matching or the decorating, spraying etc of the print could be considered to enhance its presentation.   We still have a week of school before the Pet Day (which is in Term Four, the first week back after another week of holidays) and given the size of the print a reprint is a distinct possibility.