Background: This project was 'green lighted' by the teacher because there is the clear potential for this to lead to other prints, designs and creations in the future. This was located online and had a small amount of student input - but the potential is there for considerably more.
Resources to complete this print: iPad, Tinkercad App, Bambu P1S, Orange PLA.
Level of Difficulty: Low - the design was sourced by the student with minimum adaption although there was a clear path to modify this moving forward.
Size: The print measures 125mm across and was 95mm long. The handles and some of the design aspects of the print varied however the base was 20mm thick and the handles were 10mm wide. This was based around the design being 140mm high.
Timeframe: The print took three hours and fifty one minutes to complete on the regular default settings. As per usual this included six minutes of warm up time for the printer.
What we would do differently/next steps for the students: This trophy was not personalised to a high degree (such as last years example which was original which you can view by clicking on the link here) however there is clear potential from this design to do exactly that - by having the name plate at the front changed for that of a person or an organisation or even a team. The colour could of course be altered as could the dimensions of the print - at the moment its used for holding a set of keys however there would be multiple purposes for it depending on the way that you wanted to approach the object (for instance a smaller size would lead to a easier print run and even going the other way a larger trophy would have more importance).
No comments:
Post a Comment